Master/Slave Connections - Viking X-9 Installation Instructions And Safety Information

ELECTRICAL INSTALLATION – MASTER/SLAVE ELECTRICAL INSTALLATION – MASTER/SLAVE

Master/Slave Connections

A Master/Slave control board is available,
when required, to run two gate operators in
synchronous mode.
Using the connectors provided insert the
wires from the motor units as shown in the
diagram below. Insert the connectors in the
proper receptacles (Master or Slave, Open
Inside or Outside).
TECHNICAL SUPPORT 1 800 908 0884
Blue
Black
Free
Yellow
Brown
Red
Orange
arger
wer
w Battery
Master Open
il Safe/Secure
Master
Inside Outside
rake
Slave
Slave Open
Inside Outside
19