Single Unit Connections - Viking X-9 Installation Instructions And Safety Information

ELECTRICAL INSTALLATION – SINGLE UNIT ELECTRICAL INSTALLATION – SINGLE UNIT

Single Unit Connections

Connect the wires from the motor unit to
the terminal block mounted next to the
control board. Match wire colors to the
terminal block.
Connect the wire harness to the "OPEN
RIGHT" connector if the gate opens towards
the right side. Connect the wire harness to
the "OPEN LEFT" connector if the gate opens
towards the left side.
18
UL UL Radio Radio
UL UL Radio Radio
TECHNICAL SUPPORT 1 800 908 0884
Match
Colors
Charger Charger
Charger Charger