Table of Contents
Advertisement
4.2 Device Installation
Installing the Switch
Please mount the SSE-C3632S/R on the 19'' rack as follows:
1. Attach the two brackets on the SSE-C3632S/R with screws provided in the accessory kit.
2. Provide additional support (such as the rack shelf) for the switch when installing because the
machine is fairly heavy.
3. Put the bracket-mounted switch smoothly into a standard 19'' rack. Fasten the SSE-C3632S/R
to the rack with the screws provided. Leave enough space around the switch for good air
circulation.
Caution: Do not place anything on top of the switch. The brackets are used to fix the switch on the
rack. They are not intended to be load bearing.
Do not block the vent holes on the switch to ensure proper operation.
SSE-C3632S/SR Switch Installation Guide
Figure 4-1. Switch Installed in a Rack
Page 31
Advertisement
Table of Contents
