Device Installation; Installing The Switch - Supermicro SSE-G3648B Installation Manual

E1031Series switch Installation Guide

Device Installation

To install the SSE-G3648B/BR switch follow the instructions in the following sections.

Installing the Switch

Figure 4-1 SSE-G3648B/BR Switch Installed In A Rack
Please mount the SSE-G3648B/BR in the 19'' rack as follows:
1. Attach the 2 brackets on the SSE-G3648B/BR with screws provided in the accessory
kit.
2. Provide additional support (e.g., rack shelf) for the switch when installing because the
machine is fairly heavy.
3. Put the bracket-mounted switch smoothly into a standard 19'' rack. Fasten the SSE-
G3648B/BR to the rack with the screws provided. Leave enough space around the
switch for good air circulation.
Caution! Do not place anything on top of the switch. The brackets are used to fix the switch
on the rack. They are not intended to be load bearing.
Chapter 3 Device Installation
33