PARKING BRAKE CALIPER SERVICE
Exploded View
Pad & Holder
Pad & Holder
18 ft. lbs.
(24 Nm)
Sleeve
Hex Head
Mount Bolt
Nut
Compression Spring
Caliper Removal
NOTE: Do not get oil, grease, or fluid on the parking
brake pads. Damage to or contamination of the pads
may cause the pads to function improperly.
1.
Remove the clip pin and pin (A) from the parking brake
cable.
A
NOTE: Be sure the parking brake is not engaged.
Thrust Washer
Shim Pack
(4 Shims)
Spring Pin
2.
If replacing the brake pads, slightly loosen the caliper
assembly bolts before removing the complete caliper
assembly. This will ease the caliper disassembly procedure
later.
Plain Washer
Lever
Asm. Bolt
25 ft. lbs.
(34 Nm)
Stationary Actuator
Steel Balls (3)
BRAKES
Hex Nut
Figure 9.10
9
9.11