Handle Trigger; Turbo Dot Peen Mode - Microscan HE45T Quick Start Manual

Handle Trigger

FIGURE 1–42.

Turbo Dot Peen Mode

The HE45T with the default settings offers the best overall
performance for Data Matrix DPM reading. For reading dot peen
marks with cell size larger than 15 mils or 0.015 inches, it is often
possible to improve the reading performance by enabling the Turbo
Dot Peen mode. It is also recommended that you use Read With
Near Field Only mode with the Turbo Dot Peen On mode to
achieve the best reading response.
Note: Turbo Dot Peen mode should not be used for reading small
marks (dot peen or others) as it may increase the processing time
and reduce the robustness of reading small marks.
FIGURE 1–43.
On
Rev 2.0.0, Jan 2009
Handle Trigger Programming Codes
Read With Both Imagers (Default)
Read With Far-Field Imager
Read With Near-Field Imager
Turbo Dot Peen Mode Codes
Off
HE45T Quickstart Guide
Save Settings
25