How To Transfer Stored Data To A Host Computer; How To Manually Enter Data - Microscan HE45T Quick Start Manual

Select Delete (Figure 1–29).
5.
FIGURE 1–29.

How to Transfer Stored Data to a Host Computer

Make sure the HE45T is attached to a host computer by cable
1.
or by a wireless Bluetooth connection.
The HE45T screen should be at the Ready prompt. Press the
2.
CLEAR button to return to the Ready prompt if necessary
(Figure 1–30).
Select Options (Figure 1–30).
3.
Select Send all to transfer all stored data to the host computer
4.
(Figure 1–30).
The HE45T will display a message that all data was sent.
FIGURE 1–30.

How to Manually Enter Data

Begin at the Ready prompt (Figure 1–31).
1.
Select Options (Figure 1–31).
2.
Select Enter data (Figure 1–31).
3.
You can enter numbers, text, or symbols. Press the SHIFT key
4.
to toggle between entry modes. Press a key multiple times to
cycle through the available letters in the text entry mode just
like a cell phone. Press the 0 key multiple times to cycle
through all the available symbols (Figure 1–31).
16
Deleting Stored Data
Transferring Stored Data to the Host Computer
HE45T Quickstart Guide Rev 2.0.0, Jan 2009