Batch Mode - Microscan HE45T Quick Start Manual

The following options apply to all symbologies:
• UII/CPN On for All Symbologies — The HE45T is configured
to construct UII/CPN/LBN for all symbologies. For decoded
symbologies without valid UII/CPN/LBN, the HE45T stops
image acquisition without an output string.
• UII/CPN Off — The HE45T is back to normal decoder
behavior without constructing UII/CPN/LBN.
FIGURE 1–38.
UII/CPN DM On
UII On for All Symbologies
Save Settings

Batch Mode

The HE45T unit features a batch mode for applications requiring a
portable reader. Batch mode allows a user to store scanned data to
the reader's non-volatile memory. You may transfer the data to a
host computer when needed. To utilize batch functionality, you will
need to use the BH1/BH2 battery handle.
The HE45T dedicated batch memory is a minimum of 1MB. To
determine the number of reads that may be stored, divide the
average bytes of a scan into the total minimum memory.
22
UII Codes For All Symbologies
HE45T Quickstart Guide
UII DM with Data Field
UII/CPN Off
Rev 2.0.0, Jan 2009