Table of Contents
Advertisement
3
RECORD SET
3
Turn the shuttle dial clockwise.
4
Press the [EXIT] button.
The setting procedure is ended and the display returns to
the normal screen.
EXIT
When the normal recording area or the alarm
recording area become full
Make a new "AREA FULL RESET" setting for "NORMAL
RECORDING AREA" and "ALARM RECORDING AREA"
on the <RECORDING AREA SET> screen.( P.61)
Setting normal recording
Use the following procedure to make normal recording
settings for recording quality, audio recording, and
recording rate. Alternatively, a program number set using
"PROGRAM REC SET" can be specified to set these
parameters.
1
Press the [MENU] button.
The MENU indicator lights up and the <MAIN MENU> is
displayed.
MENU
2
Turn the jog dial to select "2. RECORD
SET", and then turn the shuttle dial
clockwise.
The <RECORD SET> screen is displayed.
3
Turn the jog dial to select "4. NORMAL
REC MODE SET", and then turn the
shuttle dial clockwise.
The <NORMAL REC MODE SET> screen is displayed.
4
Turn the shuttle dial clockwise.
"ENHANCED" flashes (indicating enhanced quality
recording).
5
Turn the jog dial to select "PICTURE
QUALITY", and then turn the shuttle dial
clockwise.
[Settings] (
indicates default setting)
Setting
BASIC (BA)
NORMAL (NO)
ENHANCED(EN)
FINE (FI)
SUPER FINE (SF)
The file size is intended as a general guideline and
actual sizes will depend on the recorded video.
The following settings are carried out using the shuttle
dial and jog dial.
Vertical cursor movement: Turn the jog dial.
Cursor movement to the right: Turn the shuttle dial
clockwise.
Modification of values : Turn the shuttle dial clockwise,
and then with the setting value flashing, turn the jog dial.
Confirmation of values : Turn the shuttle dial clockwise.
6
Set "AUDIO RECORDING".
(Default setting: OFF)
(Example: ON)
64
Description
15 kB
22 kB
30 kB
42 kB
50 kB
English
Advertisement
Table of Contents
