Table of Contents
Advertisement
3
RECORD SET
7
Turn the shuttle dial clockwise.
"OFF" flashes.
8
To activate timer operation, turn the jog
dial to select "ON", and then turn the
shuttle dial clockwise.
The cursor moves to "START".
The following settings are carried out using the shuttle
dial and jog dial.
Vertical cursor movement: Turn the jog dial.
Cursor movement to the right: Turn the shuttle dial
clockwise.
Modification of values: Turn the shuttle dial clockwise,
and then with the setting value flashing, turn the jog
dial.
Confirmation of values: Turn the shuttle dial clockwise.
If timer recording has been set to "ON", the timer's
"START" and "STOP" should now be set.
9
Set "PICTURE QUALITY".
English
[Settings] (
indicates default setting)
Setting
BASIC (BA)
NORMAL (NO)
ENHANCED(EN)
FINE (FI)
SUPER FINE (SF)
10
Set "AUDIO RECORDING".
(Example: ON)
[Settings] (
indicates default setting)
Setting
OFF
Audio recording is not carried out.
ON
Audio recording is carried out.
Audio recording can only be specified when the
recording rate is 1.00 FPS or greater.
When set to "ON", the letter "A (indicating that audio will
be recorded)" is displayed in front of recording rate. As
both video and audio will be stored in the normal
recording area, this area's overall capacity will reduce
accordingly.
11
Turn the shuttle dial counter-clockwise.
<WARNING> screen is displayed.
12
Turn the jog dial to select "YES", and
then turn the shuttle dial clockwise.
The display returns to the <NORMAL REC EASY SET>
screen.
57
Description
15 kB
22 kB
30 kB
42 kB
50 kB
Description
Advertisement
Table of Contents
