Sanyo DSR-3506P Instruction Manual page 69

Digital video recorder with multiplexer function
Hide thumbs Also See for DSR-3506P:
Table of Contents

Advertisement

3
RECORD SET
4
Turn the jog dial to set "SUN" to "DLY",
and then turn the shuttle dial clockwise.
The start time flashes as "--:--".
5
Repeat steps 3 and 4 to set the
remaining items using the shuttle dial
and jog dial.
To change a displayed setting item
Turn the shuttle dial in the required direction to select
the item to be changed, and then turn the jog dial to
change the setting.
Picture quality and recording rate for timer
recording
Picture quality is set using "PICTURE QUALITY" from
the "4. NORMAL REC MODE SET". ( P.64)
When program recording is set to "OFF", the "REC
RATE" from the "4. NORMAL REC MODE SET" sub-
menu is used. ( P.64)
6
Press the [EXIT] button when all of the
necessary settings have been made.
The display returns to the normal screen.
EXIT
To set different recording times and/or
recording rates for each day of the week
Set the desired recording times and recording rate for
each day.
If specific days are set as holidays, the operation for
Sunday will be used on those days also. ( P.50)
If timer settings overlap, recording is performed in the
following sequence.
Each daily reservation → DLY → EXT
Priority (high) ←−−−−−−−−−−−−→ (low)
If a reservation for a particular day overlaps with a daily
reservation, priority is given to that with the earliest start
time. If both have the same start time, priority is given to
that with the highest setting position in the menu.
To cancel all set timer reservations
1
Press the [MENU RESET] button with
the <TIMER SET> screen displayed.
All setting items are cleared.
Timer reservations spanning more than 24
hours
Use the following procedures to set timer recordings
spanning more than 24 hours. The 7th (SAT) and 8th
(DLY) lines from the <TIMER SET> screen are used for
this purpose.
Example:
Timer recording from 10:30 on Monday to 20:30 on
Wednesday with a recording rate of 5 FPS.
1
Turn the jog dial to select line 7 (SAT),
and then turn the shuttle dial clockwise.
"SAT" from the "WEEK" column flashes.
You can change the setting of the flashing item.
Line 7
68
[MENU RESET] button
English

Advertisement

Table of Contents
loading

Table of Contents