Table of Contents
Advertisement
1
INTERFACE SPECIFICATIONS
RS-485 specifications
Data format
Mode
Asynchronous
Character length
8 bits
Data transmission speed
2,400, 4,800, 9,600, 19,200 bps
Parity check
None
Stop bit
1 bit
Communication protocol
A proprietary Sanyo protocol (SSP: Security Serial
Protocol) is used. Use of a special controller for operation
is recommended. To obtain this controller, contact a Sanyo
service center.
English
RS-485 termination switch settings
Termination settings
When connecting multiple devices, you must make
termination settings on both end devices.
Set the RS-485 termination switch of both end devices
to ON.
Be sure to set the RS-485 termination switches of all
devices in between (devices other than the first and last
devices) to OFF.
If you don't make the correct termination settings, the
incorrect data will be transmitted to each device.
Example
System controller
Digital video recorder
Time – lapse VCR
101
ON
Termination
switch
OFF
ON
RS485
termination
OFF
ON
Termination
switch
OFF
Advertisement
Table of Contents
