Starting To Embroider - Bernina 580 Manual

Motifs
154

Starting to embroider

Select hoop
select motif
█
►
the selected motif is displayed in the optimal (the smallest) hoop
►
the «Select hoop»-icon displays the recommended hoop
attach the recommended hoop
█
Attaching the embroidery hoop
raise needle and embroidery foot
█
hold the hoop with the right side of the fabric up and the attaching
█
mechanism to the left
Attach the hoop to the embroidery arm
guide the hoop underneath the embroidery foot
█
press the attaching mechanisms of the hoop toward each other
█
position the center points of the hoop (small attachment clamps) over the
█
bracket of the embroidery arm
press down until it clicks in position
█
release the attaching mechanism of the hoop
█
Removing the hoop
press both of the attaching mechanisms of the hoop toward each other
█
lift the hoop up to remove
█
press «Embroidery menu»-button or «Start/Stop»-button on the headframe
█
►
the hoop moves
►
the hoop is read
As soon the «Embroidery menu»-button has been pressed, made
alterationen will not be visible anymore when going back to the
«Edit»-display. The «Information»-icon turns blue again, the function
icons are no longer yellow-framed and the setting is at 100%.
033527.53.04_2014-07_Manual_B580_EN