Starting To Embroider Select Hoop; Attaching The Embroidery Hoop; Attach The Hoop To The Embroidery Arm; Removing The Hoop - Bernina 7 Series Manual

Embroidery motifs Embroidery motifs
Starting to embroider
Select hoop
1
160
2
1
⦁ select motif
►
the selected motif is displayed in the optimal (the smallest) hoop
►
the «Select hoop»-icon displays the recommended hoop
⦁
attach the recommended hoop

Attaching the embroidery hoop

⦁ raise needle and embroidery foot
⦁ hold the hoop with the right side of the fabric up and the attaching
mechanism to the left

Attach the hoop to the embroidery arm

⦁ guide the hoop underneath the embroidery foot
⦁ press the attaching mechanisms of the hoop toward each other
⦁ position the center points of the hoop (small attachment clamps) over the
bracket of the embroidery arm
⦁
press down until it clicks in position
⦁
release the attaching mechanism of the hoop

Removing the hoop

⦁
press both of the attaching mechanisms of the hoop toward each other
⦁
lift the hoop up to remove
⦁
press «Embroidery menu»-button or «Start/Stop»-button on the headframe
►
the hoop moves
►
the hoop is read
Calibrating the embroidery hoop see page 48.
As soon the «Embroidery menu»-button has been pressed, made
alterationen will not be visible anymore when going back to the
«Edit»-display. The «Information»-icon turns blue again, the function
icons are no longer yellow-framed and the setting is at 100%.