Starting To Embroider; Starting To Embroider Select Hoop; Attaching The Embroidery Hoop; Attaching The Hoop To The Embroidery Arm - Bernina 880 Manual

Motifs

Starting to embroider

Select hoop
1
1
198
2
1
034791.51.04_2014-02_Manual_B880_EN
⦁ select a motif
►
the selected motif is displayed in the optimal (the smallest) hoop
►
the «Select hoop»-icon 1 Displays the recommended hoop
⦁
attach the recommended hoop

Attaching the embroidery hoop

⦁
raise needle and embroidery foot
⦁ hold the hoop with the right side of the fabric up and the attaching
mechanism to the left

Attaching the hoop to the embroidery arm

⦁ guide the hoop underneath the embroidery foot
⦁ press both of the attaching mechanisms of the hoop toward each other
⦁ position the center points of the hoop (small attachment clamps) over the
bracket of the embroidery arm
⦁ press down until it clicks in position
⦁ release the attaching mechanism of the hoop

Removing the hoop

⦁
press both of the attaching mechanisms of the hoop towards each other
⦁
lift the hoop up to remove
⦁
press the «Embroidery menu»-button or the «Start/Stop/hover»-button
►
the hoop moves
►
the hoop is read
Calibrating the embroidery hoop see page 57.
As soon the «Embroidery menu»-button has been pressed, motif
alterations will not be visible anymore when going back to the
«Edit»-Display. The «Information»-icon turns blue again, the function
icons are no longer yellow-framed and the setting is at 100%.