Bluetooth Connection; Resetting The Personal Tracker - Honeywell GMPT-401-C1D2 User Manual

Chapter 3 — Operation

Bluetooth Connection

Resetting the Personal Tracker

20
To establish a Bluetooth connection between the tracker and the phone:
1 Turn the tracker on by pushing the power button for 2 to 5 seconds.
2 Press the Bluetooth button on the tracker. The tracker is then discoverable
for 2 minutes.
Bluetooth Pairing
3 Activate Bluetooth on your phone.
4 Open the GMPT-401 App. Touch Settings, Bluetooth. Select the tracker on
the list of available devices (see the label on the tracker for the Bluetooth
MAC address).
Note: The tracker should only be paired with the phone through the GMPT-
401 app. Do not pair the tracker via the Bluetooth settings on the phone.
5 Enter PIN code 123456. The tracker will pair with your phone.
When connected the Bluetooth connection icon shows on the status bar of
the GMPT-401 App.
In the unlikely event that the tracker becomes unresponsive or shows erratic
behavior, a hard reset may be required. To reset the tracker, press the power
button for >10 seconds (until the LEDs turn off). The tracker is now reset. To
power on press the power button for 2 seconds.
Resetting the tracker does not change any settings.
Button
Bluetooth Connection
Icon
GMPT-401 Personal Tracker User Guide