Test The Connection; Resetting The Handset - Uniden XDECT 8155 Series Owner's Manual

Test the Connection

Pick up the handset and press TALK/FLASH. Make sure you get a dial
tone. (Press END to hang up.)
If..
• you don't hear a dial tone
• the display shows
Registration Failed
If you are having trouble with a handset or if you want to replace one, you
need to clear the registration information from the base and the handset:
Do you have the base the HS is registered to?
1. Press & hold END and # until
the System Reset menu
appears (about 5 seconds).
2. Select Deregister HS. The
display lists all registered
handsets.
3. Select the HS you want to
reset.
4. When the phone asks you to
confirm, select Yes. The HS
clears its information from the
base & deletes its own link to
the base.
When you reset a handset (or if you buy a new one), that handset
displays a Handset Not Registered message. If you see this message
on a handset, you need to register it to a base before you can use it.
6

RESETTING THE HANDSET

Yes
Try..
Making sure the handset is fully
charged, before trying again.
1. Press & hold END and # until
the System Reset menu
appears (about 5 seconds).
2. Select Base Unavailable.
3. When the phone asks you
to confirm, select Yes. The
handset deletes its own link
without contacting the base.
No