Privacy Mode; Room Monitor; Call Transfer - Uniden XDECT 8155 Series Owner's Manual

Privacy Mode

To activate privacy mode on a land line call in progress, press MENU/
SELECT. As long as privacy mode is on, you'll see a
no other handsets can join your call. Privacy mode turns off automatically
when you hang up; you can also turn it off by pressing MENU/SELECT
twice.
To use privacy mode during a conference call, wait until all handsets have
joined the call before turning on privacy mode. If a handset disconnects,
that handset cannot rejoin the call as long as privacy mode remains on.

Room Monitor

This feature allows you to monitor sounds in another room. Place a
handset in the room you wish to monitor; it will function as a microphone.
A second handset/base can be used as a remote speaker, allowing you to
monitor sounds in the room.
Using Room Monitor
To enter the Room Monitor mode, press MENU/SELECT and then select
Room Monitor. Press END/CLEAR on the handset or PLAY/STOP on the
base when you want to stop monitoring.

Call Transfer

To change the...
Transfer a call
cancel a transfer
return to the call
answer a call transfer
page
38
On the Landline...
Press MENU/SELECT and choose Hold/Transfer
from Handset or press INTERCOM/FIND HS on
the Base. The phone puts the call on hold and
prompts you to select the handset you want to
page. When the other handset accepts the call,
you'll be disconnected (press HOME/FLASH to
rejoin the call).
Press END/CLEAR.
Press HOME/FLASH. Press MOBILE.
Press HOME/FLASH. You can speak to the
transferring handset.
To speak to the outside caller,
Press HOME/FLASH. Press MOBILE.
in the display, and
Using the Mobile
Phone...