Test The Connection - Uniden XDECTR055+2 Owner's Manual

Test the Connection

Pick up the handset from the base and press
should pick up line 1 automatically and change the display to show
, and you should hear a dial tone.
Talk
When you get a dial tone, make a test call; press
If...
the base display says
Check or you don't hear a
dial tone
there's a lot of noise or
static
the handset display says
Unavailable
Test Line 2 (Optional)
If a second line is connected, make a test call on the second line.
Pick up the handset and press the unmarked key under
should hear a dial tone and the display should show Talk
SUN 12:00A
Handset #1
closer to the base or resetting it (see page 49).
Try...
checking the connection between the
base and the phone jack: make sure the
cord is connected to
see page 47 for tips on avoiding
interference.
resetting the handset (see page 49). If
you have accessory handsets, try using
a different handset for the test call.
If...
the display says
Check or
you don't hear a
dial tone
Test any accessory handsets the same way. If
you can't get a dial tone or the handset display
says Unavailable, try moving the handset
TALK/FLASH.
to hang up.
END
PRIMARY LINE
Try...
checking the connection
between the base and the phone
jack: if you have a separate jack
for each line, make sure the
cord is connected to
. The phone
.
. You
LINE2
.
.
TEL LINE 2
7