Setting Up The Mobilelink Bluetooth™ Connection - Uniden XDECT 8155 Series Owner's Manual

SETTING UP THE MOBILELINK BLUETOOTH™ CONNECTION
The XDECT 8155 with MobileLink technology can connect with mobile
phones that support the Bluetooth V2.1 handsfree profile.
Visit our website on the front cover or contact customer service for a
detailed list of tested mobile phones.
• If you are not certain of the profiles supported by your Bluetooth phone
or if you have difficulty pairing your phone to the XDECT 8155, see the
manual that came with your phone.
• With the MobileLink feature, you can essentially treat your mobile phone
as a second line. You can use the XDECT 8155 handset to make and
receive calls on your mobile phone number, put mobile phone calls
on hold, and transfer calls to other handsets. See page 26 for more
information.
• Bluetooth wireless devices have a maximum range of about 3 m; the
actual range will vary depending on local conditions (obstacles, battery
power, interference, etc.).
Pair your Bluetooth phone
Pairing "introduces" the Bluetooth device and the XDECT 8155 and gives
them permission to connect to each other. In most cases, once you pair a
phone to the XDECT 8155 , these devices connect automatically whenever
they detect each other. (If you have to manually reconnect each time,
check the Bluetooth settings on your mobile phone.) You can pair your
Bluetooth devices through the XDECT 8155.
1. Press MENU/SELECT to display the main menu.
2. Select the Bluetooth Setup menu, then select the Add Mobile phone
submenu. The base goes into pairing mode when the handset displays
Search & select from Mobile XDECT8155 PIN: 0000.
3. On your Bluetooth phone, start a search for other Bluetooth devices.
(This process may take several seconds and it will be different for each
mobile phone. See your phone owner's manual for detailed instructions.)
4. Your phone should discover a device called XDECT 8155 or Handsfree
device. When your phone asks if you want to pair with this device,
answer yes.
5. 5. If your phone prompts you for a PIN code or password to pair with the
XDECT 8155, enter 0000 (four zeroes).
13