Uniden XDECT 8155 Series Owner's Manual page 24

Date & Time Menu
Use this menu to set the clock. Enter the date (DD/MM/YY) and time,
select AM or PM. Use
it. If you have CID service, you can set it to provide the time (Global Setup/
Time Adjustment).
Global Setup Menu
The settings on this menu affect all handsets. Only one handset at a time
can change these menu options.
Set Line Mode
VMWI Reset
Edit Voice Mail
Edit Int'l No
Insert 0
Time Adjustment
Room Monitor Menu
This feature allows you to monitor sounds in another room. Place a
handset in the room you wish to monitor; it will function as a microphone.
A second handset/base can be used as a remote speaker, allowing you to
monitor sounds in the room.
To enter Room Monitor mode, press MENU/SELECT. Then select the
Room Monitor. Select the handset/base you want to monitor. Press END/
CLEAR on the handset or PLAY/STOP on the base when you want to stop
monitoring.
24
to move the cursor past a digit without changing
CID
Do not change this setting unless instructed to by
customer service.
Reset the Voice Message Waiting Indicator (see
page 39).
Enter, edit your voice mail access number (page 39)
Enter, edit, or delete international numbers. The "+"
in a phonebook entry will be actually dialed with this
number.
This feature adds "0" or "00" at the beginning of the
number received from Caller ID. The default setting
for New Zealand is ON. The default setting for
Australia is OFF.
Select Auto from CID to allow phone network to
automatically set cordless phone system time.