Table of Contents
Advertisement
The accessory handset won't work until you register it to a base!
Compatible Bases
This handset is designed for use with Uniden's XDECT SSE25 and
XDECT SSE27 Series bases.
Other compatible Uniden bases include the DECT 2015, DECT 2035,
XDECT 7015 and XDECT 7055 models. Some features may not be
available when using the XDECT SSE05 with these other bases.
For the most up-to-date list of which bases this handset is compatible
with, see our website.
registration Methods
There are three different registration methods, but it's easy to figure
out which one applies to your handset and base. Answer the two
questions to register the handset to one of the compatible bases.
Does the handset fit in the base cradle?
Place the handset in the base. The display should say Handset
Yes
Registering.
Does the base have an LCD display?
No
Yes
No
After about 30 seconds, the handset display should say
Registration Complete.
Test the connection
Pick up the handset and press
(Press
again to hang up.1
TAlk
registering to a Base
1.
On the base, open the menu and select
The display should say Handset Registering.
2.
On the handset, press and hold
display says Handset Registering (about 2 seconds).
1.
Disconnect the base AC adapter.
2.
On the base, press and hold
adapter.
3.
On the handset, press and hold
says Handset Registering (about 2 seconds).
FIND
. Make sure you get a dial tone.
TAlk
4
Register Handset.
until the handset
HASH (#)
while you reconnect the
until the display
HASH (#)
Advertisement
Table of Contents
