Mounting The Base Unit On A Wall - Uniden XDECT 8155 Series Owner's Manual

Mounting the base unit on a wall

1. Connect the AC adaptor
and telephone cords as
shown below. Remember to
route the AC adaptor cord
through the channel.
2. Line up the four tabs on
the wall mount bracket
(two at the top and two at
the bottom) with the four
notches on the bottom of
the base. Slide the bracket
into place. It may help to
pinch the two front prongs together to slide easier into the bottom tabs.
3. Plug the telephone cord into the wall jack.
6. Plug the adaptor into a standard
240V AC power outlet.
8
4. Place the mounting slots
over the pins on the wall
plate.
5. Slide the base down to lock
it into place.