Uniden XDECT 8155 Series Owner's Manual page 10

Connect the Repeater Power Cord
Use the included adaptor to connect the
repeater to a regular indoor (240 V AC)
power outlet.
Placing the Repeater
Here are a few tips for placing your
repeater so that you get the clearest
signal and the maximum range:
• Place the repeater just inside the
base's coverage area, that is, as far
from the base as possible where you
still have good reception.
• Put the repeater at least 10 m away
from the base or any other repeater.
• If you place the repeater on a flat surface, make sure the power cord
doesn't pull on the unit and that people walking by won't knock it off the
surface.
• If possible, mount the repeater on the wall.
Finding the Base's Coverage Area
1. Stand near the base and make a call on a cordless handset that is
registered to that base.
2. Continue the call and carry the handset away from the base. Make sure
you go at least 10 meters.
3. Make a note where you start to hear noise on your call (the signal is
getting weaker). You can use the signal strength icon on the handset
display to find the best location: make a note where the icon indicates
the signal is getting weaker.
4. Place the repeater anywhere inside the range where the handset had a
clear connection with no noise and the icon showed a strong signal.
10
Wall-mount
holes
Registration
button
Power connector