Multihandset Features - Uniden XDECT 8155 Series Owner's Manual

Multihandset Features

# To use the features in this section, you need at least 2 handsets.
Your base supports a total of 12 cordless handsets: the one that came with
the base and up to 11 accessory handsets.
You must register accessory handsets to the base before using them.
(Handsets that came packaged with the base are already registered.)
Handsets that aren't registered display a Not Registered message. For
registration instructions, see page 48 or see the accessory handset
manual.
If a handset was ever registered to a base, you must reset it before it can
register to a new base; see page 48, or see the accessory handset manual.
Conference Calling (Line 1)
• When an outside call comes in on the land line or the via a mobile, two
handsets and the base can join in a conference call with the outside
caller.
• To join a call that's already in progress, just press HOME/FLASH (to
join a Landline call) or MOBILE (to join a Mobile call).
• To leave the conference call, hang up normally; the other handset
remains connected to the call.
Conference Calling (Line 2)
A landline call and a mobile call can be connected in conference using the
Line Conference feature.
• When an outside call comes in on the land line and then another
outside call via a mobile, two handsets and the base can join in a
conference call with the outside callers (5-way conference).
• To conference a the second outside call, press MENU/SELECT and
then select Conference.
• To join a call that's already in progress, just press HOME/FLASH or
SPEAKER.
• To leave the conference call, hang up normally; the other handset
remains connected to the call.
37