1.
Pick up the handset from the cradle and press
Test the Connection
hear a dial tone, and the display should say Talk.
If you don't hear a dial tone or the display says
try checking the connection between the base and the phone
jack.
2.
Make a quick test call. (Press
If there is a lot of noise, see page 16 for tips on avoiding
interference.
3.
Test all your handsets the same way. If you can't get a dial tone,
try moving the handset closer to the base.
Getting to Know Your Phone
Parts of the Handset
EARPIECE
DISPLAY
PHONEBOOK/LEFT
TALK/FLASH
MENU/SELECT
4
REDIAL/PAUSE
End
DOWN
. You should
Talk
Check Tel Line,
to hang up.)
STATUS
UP
CALLER ID/RIGHT
END
TWELVE-KEY DIAL PAD
HOLD/CLEAR/INTERCOM
MICROPHONE
CHARGING CONTACTS