Battery Information - Uniden XDECT 8155 Series Owner's Manual

IMPORTANT INFORMATION
• As the handset adapts to the base, the exact features and operation of
the handset will vary slightly depending on which base you register the
handset to. Refer to the owner's manual for the base you're registering
the handset to for feature descriptions.
• All features and operation for the handset are described in the owner's
manual for one of the bases listed under the Compatible Bases
section.
• Owner's manuals for all Uniden phones are available on our website
for free downloading.
AC Adaptor
Parts Number
AAD-600S(M)

Battery Information

Type
BT-694
• Use only the supplied AC adaptors.
• Be sure to use the proper adapter for the base and any chargers.
• Do not place the power cord where it creates a trip hazard or where it
could become chafed & create a fire or electrical hazard.
• Do not place the unit in direct sunlight or subject it to high
temperatures.
• Fully charged, the battery should provide about 12 hours of talk time
and about 12 days of standby time. For best results, return the handset
to the cradle after each call to keep it fully charged.
• Keep an eye on the battery status icon. When the battery gets too
low, the handset shows a low battery alert. If you hear a strange beep
during a call, check the display: if you see the low battery alert, finish
your conversation as quickly as possible and return the handset to the
cradle. If the handset is in standby, none of the keys will operate.
• With normal use, the battery should last about one year. Replace the
battery when the talk time becomes short even when the battery is
charged. To buy a replacement battery, visit the website.
Input Voltage
100-240V AC, 50/60Hz
Capacity
650mAh
9V DC @ 210mA
Talk time
about 12 hours
Output Voltage
Standby Time
about 12 days
7