Standalone (Program) Mode; Manual Color Adjustment - Blizzard Lighting HUSH PAR Infiniwhite 500 Getting Started

DMX Mode
Allows the unit to be controlled by any universal DMX controller.
1.) The default mode for the fixture is DMX, which appears as
select a different DMX address, using the <MENU> button, select
Use the <UP/DOWN> buttons to select the correct address, then hit <ENTER> to confirm.
Setting the DMX channel Mode:
1.) To select a DMX channel mode, press the <MENU> button, then use the <UP> or
<DOWN> buttons until the display reads
the <UP> or <DOWN> buttons until the display reaches your desired channel mode. Press the
<MENU> button to confirm.
Stand-Alone, Master/Slave, Sound Active Modes:
Allows a single or Master/Slaved units to run factory installed programs at user selectable speeds.
1.) To set the fixture in Flash/Fade mode, select
<ENTER> button.
2.) Now, you can adjust the flash settings from
FA00-FA15.
3.) To use the fixture in automatic mode, select
use the <UP/DOWN> to choose from
confirm.
4.) Adjust the speed of the chase as above using
press the <ENTER> button to confirm.
5.) To set the fixture as a slave unit, select
SL.AU
flashing
Sound Active Mode:
1.) To use sound active mode, select

Standalone (program) Mode:

Allows a single unit to display a variety of colors and programs without a DMX controller.
1.) To set the fixture in manual mode, select
To confirm, press the <ENTER> button.
2.) Now, select the program by using the <UP> and <DOWN> buttons to select
Pr15
. To confirm, press the <ENTER> button.

Manual color Adjustment:

Allows the user to adjust the color balance of the fixture. These settings are global, they will effect all
modes.
1.) Use the <MENU> and <UP/DOWN> button to select
White Level),
2.) Using the <UP/DOWN> buttons, select the maximum level for each color between
x000-x255
HushPar Infiniwhite Manual Rev. A
Then press the <ENTER> button to confirm.
to indicate it is in slave mode.
bL--
(Cool White Level), then hit <ENTER>.
(000=off), then hit <ENTER> to confirm.
Chnd
and press the <MENU> button. Then use
FLAS or FAdE
FL00-FL15
ASC-
, and press the <ENTER> button. Then
AS00-AS15
, then press the <ENTER> button to
SP15
(slowest) to
SLAU
, and hit <ENTER>. The unit will display a
SouA
, then press the <ENTER> button to confirm.
Pr--
.
rL--
Page 12
d001
on the LED Readout. To
Addr
,then hit <ENTER>.
. To confirm, press the
or the fade settings from
SP00
(fastest) then
Pr00-
GL--
(Amber Level),
© 2014 Blizzard Lighting, LLC
(Warm