DMX Mode
Allows the unit to be controlled by any universal DMX controller.
Select the Channel Mode
1.) Navigate the menu to reach DMX, and press <ENTER>.
2.) Use the <UP/DOWN> buttons to select Control Mode, then <ENTER>.
3.) Then use the <UP/DOWN> buttons to select CH-6, or CH-9, and press
<ENTER> to confirm.
Select the Starting DMX Address
1.) Navigate the menu to reach DMX, and press <ENTER>.
2.) Use the <UP/DOWN> buttons to select Address, then <ENTER>.
3.) Then use the <UP/DOWN> buttons to select a value from 1-512, and
press <ENTER> to confirm.
Static Mode
1.) Navigate the menu to reach Static, and press <ENTER>.
2.) Use the <UP/DOWN> buttons highlight Red, Green, Blue, Amber,
Lime, or Strobe, and press <ENTER>.
3.) The Dimmer values will increase/decrease the brightness from 0% to
100%, and Strobe values will change the effect (from slow to fast).
Dimming Curves
1.) Navigate the menu to reach Personality, and press <ENTER>.
2.) Use <UP/DOWN> to highlight Dim Curve, and press <ENTER>.
3.) Then use the <UP/DOWN> buttons to select Linear, Square Law, Inv
Square Law, or S Curve, and press <ENTER>.
Linear
DMX%
Note: Smoother (and slower) dimming capabilities can be achieved with use of the 4
available dimming curve settings.
Dimming Speed
Allows you to set a fade speed of either Low, Medium, or High. This can help
simulate fade speeds of incandescent lamps.
1.) Navigate the menu to reach Personality, and press <ENTER>.
2.) Use the <UP/DOWN> buttons to select Dim Speed. Press <ENTER>.
3.) Then use the <UP/DOWN> buttons highlight Off, Low, Medium, or
High, then press the <ENTER> button.
node:b™ RGBAL Manual Rev. A
Square Law
Inv Square Law
DMX%
Page 12
S Curve
DMX%
© 2022 Blizzard Lighting, LLC
DMX%