Cutting Rotary Drive Belt - CanyCom CMX222 Operator's Manual

5

Cutting Rotary Drive Belt

• Adjust belt tension properly. Inproperly tensioned belt may reduce performance
and its service life.
5321M-0509-050E
5323M-0509-020E
Maintenance
Adjust Nut
Spring
A
1. Remove upper rear cover.
2. Move cutting height adjust lever to [180].
3. Move cutting rotary clutch lever to [ON].
4. Check v-belt tension. Inspect that the length
of spring is within the range of 115mm+/-
1mm. If it is out of this range, adjust spring
with adjust nut.
5. Visually inspect belt. Replace belt if it is
damaged. For replacement, contact your
CANYCOM representative.
6. Move cutting rotary clutch lever to [OFF].
7. M o v e c u t t i n g h e i g h t a d j u s t l e v e r t o
[Transport].
8. Install upper rear cover back in place.
-66-