Suction Filter - CanyCom CMX222 Operator's Manual

5
5323M-0508-050E

Suction Filter

NOTE
• Replace suction filter when replacing HST fluid.
5321M-0508-090E
Maintenance
Drain Plug
Suction Filter Cartridge
Changing
1. Have an appropriate oil drain pan.
2. Open engine hood.
3. Remove oil filler cap.
4. Remove drain plug to drain fluid.
5. Install drain plug back in place.
6. Fill specified amount of fluid.
7. Check fluid level. Make sure it is at the
specified level.
8. Install oil filler cap back in place.
9. Close engine hood.
1. Open engine hood.
2. Remove right side cover.
3. Remove suction filter cartridge.
4. Have a new suction filter cartridge. Coat its
seal with clean engine oil evenly.
5. Screw it into its mount. Tighten it by hand
until the cartridge is firmly in place.
6. Install right side cover back in place.
7. Close engine hood.
-60-