Chassis - CanyCom CMX222 Operator's Manual

5

Chassis

• Perform a pre-startup inspection (PSI) before each use, a monthly inspection once a
month, and a yearly inspection once a year.
• Some maintenance procedures described below may require special knowledge
or tools and instruments. Contact your CANYCOM representative to perform such
procedures.
Item
Tires
Transmission
Auxiliary
Transmission
Front Diff. * 1
Front Knuckle
* 1 * 2
Center
Gearbox* 1
* 1 CMX222
* 2 CM223
Maintenance
Description
Tires shall be inflated to the specified
pressure.
Tires and wheels shall be free of crack,
damage, or uneven wear.
Wheel bolts shall not be loose or missing.
Wheel bearings do not exhibit excessive play
and no irregular noise or overheating shall
be observed.
Irregular noise or overheating shall not be
observed when moving forward or backward.
There shall not be oil leaks in or around
transmission.
Transmission can be shifted to either position
positively and performs normally.
Lever shall not be loose or have excessive
play.
Irregular noise or overheating shall not be
observed when traveling.
There shall not be oil leaks in or around front
differential case or knuckles.
Transmission can be shifted to either 2WD
or AWD position positively and performs
normally.
Irregular noise or overheating shall not be
observed when traveling.
There shall not be oil leaks in or around
center gearbox.
Schedule
√ √ √
√ √ √
-40-
Note
Page 56
√ √
√ √
√ √
√ √
√ √
√ √
√ √
√ √
√ √
√ √
√ √