Display Setup For Telemetry Sensor - GRAUPNER mz-24 HoTT Operating Instructions Manual

Touch
Touch
- ESC MOD
You may decide the voice functions of ESC MOD to use or not to use. 4 voice functions, RPM,
CURRENT, POWER-V, and CAPACITY, are available.
Touch ">>" icon to call the ESC MOD setup page. All the functions are marked with red dot by
default in the page. Touch the function icon that you don't want to use then the red dot is switched
to white dot. The functions marked with white dot are deactivated. Touch "BACK" icon to return to
VOICE TRIGGER setup page.
Touch
68
Touch
Touch
Touch

14-6. DISPLAY SETUP FOR TELEMETRY SENSOR

All telemetry indication of the sensors are displayed at the receiver telemetry page.
Connect option sensors to receiver and access to the sensor select setup page by course of
page transfer.
Touch "OFF" icon of the connected sensors to switch to "ON" at the sensor select setup page.
After that, return to the receiver telemetry page. You may check all telemetry indication here
and access to the next page by touching "NEXT" icon on the top left
Touch
Touch
Touch
Telemetry
Touch