Function Menu (Helicopter); New - GRAUPNER mz-24 HoTT Operating Instructions Manual

Touch
Touch
Touch
Touch
Touch
Touch
Touch
Touch

FUNCTION MENU (Helicopter)

1. Q.LINK
This function is used to set Q.LINK and assign the corresponding switch to cope with the unex-
pected trouble situation. Since the adjusted value is activated by moving the switch and you can
cope with the crisis with just one switch. It makes you operating the flight much easier. Q.LINK for
helicopter type consists of 6 types. (NORMAL, HOLD, IDEL UP1, IDEL UP2, IDEL UP3, Q. link5 )
Normal type is set as a default value.
In the transmitter main page, touch "Function" icon to call the Function page and touch "Q.LINK"
icon to call Q.LINK setup page. Q.LINK list is displayed. "1.NORMAL" is the default value and it
cannot be changed.
Touch

1-1 NEW

This function is used to create new Q.LINK. Touch the value in "Q.LINK" line to activate it in blue
and touch "NEW" icon in the right to call "CTRL" and "DELAY" options. In "CTRL" setup, touch
"NULL" icon to call "Select" message popup and move the switch or stick with your choice then the
switch or stick is set to Q.LINK switch. To set "DELAY" function, touch "0.0s" icon to activate in blue
and set the delay time with "INC" and "DEC" buttons. DELAY indicates the time till Q.LINK start to
work after Q.LINK is switched on
Touch
Telemetry
27