Introduction; Materials - NTI XTENDEX Series ST-C5VRS-600 Installation And Operation Manual

Video and rs232 extender
Hide thumbs Also See for XTENDEX Series ST-C5VRS-600:
Table of Contents

Advertisement

Introduction

Introduction
The XTENDEX Series ST-C5VRS-600 Video and RS232 Extender is designed to enable one CPU to be viewed
or accessed by two touchscreen monitors, one local and one remote. The remote monitor can be located as
much as 600 feet away from a CPU via Category 5 unshielded twisted-pair cable. The local monitor will be
located near the CPU.
The XTENDEX Series ST-C5VRS-600 Video and RS232 Extender is extremely simple to install and has been
thoroughly tested to insure reliable performance. Through the use of Category 5 unshielded twisted-pair cable it
is possible to economically increase the flexibility of a computer system.
ways this can benefit any workplace:
• Allows the placement of a touchscreen monitor in a location where only this is needed without having
the CPU there too, taking up valuable space
• Allows a CPU to be accessed by both a local and remote user (up to 600 feet away)
• Compatible with XGA, VGA, and SVGA systems
• RS232 support enables the extension of a serial device (i.e. touch-screen monitor or mouse)
• Provides crisp and clear resolution up to 1280 x 1024 @ 600 feet
• Compatible with all NTI video switches and splitters, enabling the joining of products to create a
system that satisfies all networking needs
• Video quality is automatic providing optimum image quality

Materials

Materials
Materials Included with this kit:
NTI ST-C5VRS-600 Video and RS232 Extender Local Unit
NTI ST-C5VRS-600 Video and RS232 Extender Remote Unit
2- 120VAC or 240VAC at 50 or 60Hz-5VDC/2.0A AC Adapters
This owner's manual
Additional materials may need to be ordered, depending upon the configuration:
VEXT-xx and DINT-xx if the Local Unit will be located further than 15" from the CPU or NTI switch
CAT5 unshielded twisted-pair cable(s) terminated with RJ45 connectors wired straight thru- pin 1 to pin 1,
etc. (see pg. 8 for proper EIA/TIA 568 B wiring method)
Contact your nearest NTI distributor or NTI directly for all of your KVM needs at 800-RGB-TECH (800-742-8324)
in US & Canada or 330-562-7070 (Worldwide) or at our website at http://www.nti1.com and we will be happy to
be of assistance.
Here are some of the features and
1

Advertisement

Table of Contents
loading

Table of Contents