Installation
Installation
The Local Unit
1. Plug the cables of the Local Unit into the back of the CPU. (See Fig. 1.)
a. Connect the blue 15HD cable end to the VGA port on the back of the CPU.
b. Connect the light gray 9D cable end to the RS232 port on the back of the CPU.
S E R I A L
C O N N E C T O R
9 D M a l e
R S 2 3 2 C o n n e c t o r
V I D E O
C O N N E C T O R
1 5 H D F e m a l e
V i d e o C o n n e c t o r
2. Make connections for a Local User
a. Connect the video cable from the local user's VGA monitor to the female 15HD port on the
Local Unit.
b. Connect the local user's RS232 cable from a touchscreen monitor (see Fig. 2) to the 9D male
port on the Local Unit.
( L I G H T G R A Y - R S 2 3 2 )
( B L U E - V I D E O )
C P U
1 5 H D M a l e
V i d e o C o n n e c t o r
Figure 1- Connect the Local Unit to the CPU
4
9 D F e m a l e C o n n e c t o r
N T I
R
N e t w o r k T e c h n o l o g i e s I n c
S T - C 5 V R S - 6 0 0
L o c a l U n i t
( F r o n t V i e w )
-
+
X T E N D E X