NTI XTENDEX 300 Foot DVI Video, Audio and IR Extender
INTRODUCTION
The XTENDEX Series ST-C6DVI-300 CAT6 DVI and IR Extender (XTENDEX) is designed to enable the video and audio output
from one digital video and stereo audio source to be viewed and heard by a remote user. Each video extender consists of a local
unit that connects to an DVI video source and optional IR emitter, and a remote unit that connects to an DVI display and optional
IR receiver as much as 300 feet away via Category 5e,6, 6a or 7 twisted-pair cable.
The XTENDEX Series Extender is extremely simple to install and has been thoroughly tested to insure reliable performance.
Through the use of CAT5e/6/6a/7 (CATx) cable it is possible to economically increase the flexibility of a computer system. Here
are some of the features and ways this can benefit any workplace:
• Allows the placement of an DVI-enabled monitor in a location where only these parts are needed without having the
video/audio source there too, taking up valuable space
• Allows digital video and stereo audio to be viewed and heard by a remote user (up to 300 feet away)
• Provides crisp and clear computer resolution to 1920 x 1200 and HDTV resolutions to 1080p (see page 8 for more
details)
• Transmits DVI signal over one CATx cable.
• Only one power supply is necessary (Power supply can be connected to either the local or remote unit.)
• Supports a DVI monitor.
• HDCP 1.2 compliant
• Supports the DDC2B protocol.
• Supports 480p, 720i/p and 1080i/p video formats
OPTIONS:
Available with optional full Infrared Remote (IR) extension-full IR control of DVI source from remote HDTV extension. (add "IR" to
the model number - ST-C6DVI-IR-300)
Available with optional stereo audio extension (add "A" to the model number- ST-C6DVIA-300)
1