Table of Contents
Advertisement
Chapter 2 • Installing the indoor equipment
28
1031484-0001 Revision 2
Figure 26: Antenna Pointing - Receiver
9. Use the Elevation, Azimuth and Polarization values to adjust
the antenna to achieve maximum receive signal strength.
10. Select the ACP (auto cross-pol) checkbox. If it is not
available, wait five minutes; the system will update.
11. Select Next to go to the
screen. See Figure 27.
Figure 27: Start manual cross-pol; pass and peak isolation
Antenna Pointing - Transmitter
Advertisement
Table of Contents
