Tools Menu; Favorites; System - Raven Cruizer II Operation Manual

Tools Menu

Quick Access Bar
While viewing the
the screen and allows quick access the Favorites, System, GPS, Computer,
and Vehicle menus. Touch the Show All icon to view all menus within the
Tools Menu.
The following pages offer brief descriptions of the menu options which may be
found within the

Favorites

Favorites Icon - Refer to the
set up the

System

Switch - Select the source for toggling history on or off. Install and
connect the optional external switch wire to a source of +12V power
to utilize the Hardware setting.
If Touch Screen is selected, touching
Screen
Tilt - The Tilt icon is only displayed if an optional TM-1 Tilt Module is
connected to the console. Select the Tilt icon to setup and calibrate
the TM-1 Tilt Module. Touch the Information
information for this feature.
Note: The baud rate for Port B must be set to 19200 to allow Cruizer II
to communicate with the TM-1. See the
section on page 27 for information on other configurations with
SmarTrax.
Tools Menu, the Quick Access Bar is available at the top of
Tools Menu.
Favorites Menu.
will toggle coverage history recording on or off.
Favorites Menu
or
Baud Rate Settings
section on page 20 to
on the Guidance
icon for detailed
1 7