Baud Rate Settings - Raven Cruizer II Operation Manual

Baud Rate Settings

Baud rate settings allow the Cruizer II console to communicate with other
equipment such as steering, section control or DGPS systems or
components.
1. From the Home
Tools Menu
2. When connecting the products
listed below, ensure that the
appropriate port is selected and
all messages are set to zero.
Product
SmartBoom/SmartRow
TM-1 Tilt Sensor
SmarTrax
(software version 4.1 or older)
Steering Node
SCS Serial Rate Console
3. Touch Baud Rates
4. Use the following table to enter
the correct baud rate settings for
each port.
Product
TM-1 Tilt Sensor
Datalogging with a Raven
SCS 4400/4600 Console
Serial Rate Display with a Raven SCS
Serial Rate Controller
SmarTrax
(software version 3.2 or older)
SmarTrax
(software versions 4.0 or newer)
Steering Node
SmartBoom/SmartRow
SmartYield
a.SmartBoom and SmartRow will forward the GGA and VTG
messages at 5 Hz when initializing the connection.
Screen, select:
GPS
Port
A or B
B
B
B
A
.
a
Output .
Port A
---------
9600
9600
---------
Recommended
---------
Recommended
115200
19200
19200
Port B
19200
---------
---------
38400
115200
115200
19200
---------
2 7