Coverage Maps; Enabling Coverage Map Output - Raven Cruizer II Operation Manual

3. Use the Lights and Screen sliders
to adjust the brightness of the touch
screen and built-in light bar LED's.
4. Adjust the Light Bar slider in the
lower section of the Display screen
to set the light bar sensitivity. Select
one of the available sensitivities.
Note: The lower-center
illuminates when receiving a
DGPS signal.
The upper-center
illuminates when guidance is in
progress and the vehicle is on
the currently displayed guidance path. See the
section on page 7 to begin guidance.
If an optional SmarTrax system has been installed, the outside
LEDs will illuminate when the SmarTrax system is engaged.

Coverage Maps

The coverage map for the job currently stored on the console may be saved
to a flash drive which may then be transferred to a home or office PC. When
output of coverage map files is enabled, maps are saved to a flash drive
inserted in the USB port on the side of the Cruizer II console.

Enabling Coverage Map Output

To setup output of coverage map files:
1. From the Home
Tools Menu
2. Select the desired "Coverage" output format (.bmp, .shp or .kml) from the
list on the left of the screen. Below are definitions of the different formats:
Note: To avoid long file transfer times, it is recommended to select only one
output format at a time.
• Bitmap, or .bmp files, can be opened on nearly any computer without
special software.
• The shapefile format requires specialized software to view the coverage
map on a home or office PC. Shapefiles consist of three separate files,
each with the same name. The .shp, .shx and .dbf files created for each
report are essential for the shapefile format to function correctly.
• The .kml file is an XML grammar and file format that can be opened with
software like Google Earth
3. After selecting the desired output format, Select the 'On' to the right. Once
an output format is turned on, Cruizer II will automatically output the
coverage map in the selected formats when the job ends.
2 4
green LED
green LED
Screen, select:
Computer
®
.
Fine
Medium
Coarse
Starting Guidance
Updates
orange
.