Guidance Screen; (P/N 063-0173-090) Or - Raven Cruizer II Operation Manual

Guidance Screen

Once a Pattern is selected for the job, the
the Cruizer II touch screen.
The Guidance Screen
Speed
Touch the
CoG
(Course over
Ground) display to
toggle the information
displayed.
Distance to Path
Display shows the
distance and direction
from the vehicle to
the displayed
guidance path.
AccuBoom Override
and Section Status
The following icons are displayed on the
following descriptions of the different features or tools available during an
active job.
or
or
or
1 0
displays the following information:
or
GPS Status - Touch the
Status screen.
History - If the Switch
touching either of these icons to start or stop recording
coverage history. The coverage map display will start or stop
painting when either of these icons are selected.
Day or Night - Touch the day or night icon displayed next to
the speed or CoG display to switch between Day or Night
display mode.
Information - Touch to view a brief explanation of the icons
displayed or accessible on the
Zoom - Zooms in each time it is pressed until maximum
zoom is reached then zooms out.
Menu - Touch to access other guidance views, available
path tools, or return to the Cruizer II
the Guidance Menu
information.
Active Guidance Pattern - The icon to the left of the menu
icon displays the currently selected guidance pattern. Touch
the icon to select a different guidance pattern.
More information on each of the guidance patterns is
available in the Start a New Job and Load Field Features
section on page 7.
Guidance Screen
12.3
Set A or Set B icons, Swath Number
Last Pass mode is
Guidance Screen. Review the
GPS Status Icon
option is set to Touch Screen,
Guidance
section on page 12 for more
is displayed on
Area Covered
tally displays the
total field area
covered by active
sections (painted
area on the
Cruizer II display).
Coverage
History
Serial Rate
Display
displayed in this area.
to view the GPS
Screen.
Home Screen. Refer to
, or