Omnistar® Xp/Hp Restart; Receiver Display Menu; Receiver Information - Raven Phoenix 300 Installation And Operation Manual

®
OmniSTAR XP/HP Restart
If the OmniSTAR XP or HP service is set as the differential source, press the
to access the XP/HP Auto-Restart screen.
This screen displays the XP/HP restart status. When using the OmniSTAR XP or HP correction source, restart
status is the last position, or "seed," where the receiver received an OmniSTAR correction and may be stored
for subsequent receiver start ups to reduce the time required for the receiver to converge or lock onto
OmniSTAR correction.
•
No seed is available if the screen displays "NOT AVAILABLE."
•
If a seed is available for storage, "NOT STORED" will be displayed on this screen. Press the
key to change the state to "DO RESTORE." The receiver will store the last seed position for use on the next
startup.
•
If a seed is available upon startup, this screen will display "RESTORING."

Receiver Display Menu

Access the Receiver display menu to view the receiver model, Raven serial number, and firmware version.

Receiver Information

From the Home screen, press the
Receiver
Serial
Number
This screen displays the receiver serial number and the receiver software version number.
Manual No. 016-0171-548 Rev. C
key to view the receiver information.
Display Menus
key from the Home screen
arrow
Receiver
Software
Version
13