Display - Raven Cruizer II Operation Manual

AccuBoom Controller Setup
The Controller Setup screen allows the operator to select which sections the
AccuBoom system will automatically control. For example, the operator may
disable AccuBoom control for fence row sections or spray guns. In most
cases, the controller settings will be set and not changed unless the
implement or application type changes.
To configure the AccuBoom controlled sections:
1. From the Home
Tools Menu
2. Select Controller Setup
the lower, left corner of the Sprayer
screen.
3. Touch the section indicators to
enable or disable sections for
automatic section control.
It is recommended to disable
sections corresponding to fence
row nozzles or spray guns to allow
the operator to manually control
these sections.
Note: Section 1 corresponds to the left most section (as observed from the
operator cabin facing forward) in a standard boom configuration.
4. Verify that the Raven Compatible option is selected.
5. Touch the Accept
the Sprayer screen.

Display

During a job, the built-in light bar indicates the distance and direction to the
current guidance path.
Display
Mode
1. From the Home
Tools Menu
2. Select the Day or Night mode for the
Screen, select
System
in
icon to save the displayed settings and return to
Screen, select:
Computer
Sprayer
Display
Guidance Screen
.
Light Bar
and Screen
Brightness
.
display.
2 3