Raven Cruizer II Operation Manual page 24

AccuBoom Sprayer Setup
The Sprayer screen allows the operator to customize the response of the
AccuBoom system for the specific control hardware installed on the
implement.
1. From the Home
Tools Menu
2. Use the sliders or touch the
keypad icons to set the following
settings:
Note: Touch the Home icon at any
time to return to the
Screen.
Look Ahead
AccuBoom monitors the GPS position
and coverage map while considering
the look ahead times to begin controlling sections on or off before the section
crosses spray or no-spray boundaries. Look ahead times may help to
compensate for delays in the sprayer system including the time it takes for
boom or control valves to open or close.
Note: The specific look ahead time is a function of the valve timing and the
speed at which the operator is driving the machine.
Coverage Percent
AccuBoom automatic section control allows the operator to define the amount
of coverage tolerated during an application.
For applications which require complete coverage, the coverage percent
setting should be set to a higher value (80% to 100%). When applying
products that do not tolerate overlaps, the percent coverage should be set to
a lower value. The default value for the coverage percent is 80%. AccuBoom
allows a percent coverage value anywhere from 5 to 100 percent.
Override Time
The AccuBoom override feature allows the operator to override the automatic
section control feature and force all AccuBoom controlled sections on for a
user defined time interval. This feature is useful to re-apply product to a
heavily infested field area or when accelerating from a complete stop. The
time for the override may be modified to match specific application needs.
See the AccuBoom Override and Section Status
enable the AccuBoom Override during a field operation.
2 2
Screen, select
System
Home
Sprayer .
section on page 11 to