User Mode 9: L/L Environment Setting; User Mode A: H/H Environment Setting - KIP 5000 User Manual

3. 2.10 User Mode 9: L / L Environment Setting Mode
It is possible to select whether or not the L / L Environment Setting Mode is functional.
Reference
"Creasing of paper" or "Defective fusing" may occur on the prints under the extreme
environment of Low Temperature / Low Humidity (called L / L Environment.) You can avoid
the above problem if the User Mode 9 is on.
Please note that the interval of prints becomes longer than usual, and print productivity
reduces as follows if the User Mode 9 works.
(A) If continuous printing is done with 30" or wider roll media, the interval between prints
becomes 6.5 seconds.
(B) If continuous printing is done with 22" or wider vellum roll, the interval between prints
becomes 20 seconds, 30 minutes after the printer becomes ready.
1) Select "U9." by pressing [
U 9. on: Low Temperature / Low Humidity Environment Setting is on.
U 9. off: Low Temperature / Low Humidity Environment Setting is off. (Normal operation)
2) Select either "on" or "off" according to user preference by pressing the [Enter] key.
] or [ ] key.
job
TONER REMAIN
MENU
job
TONER REMAIN
MENU
1-53
IMAGE DENSITY
ENTER TEST
IMAGE DENSITY
ENTER TEST
Section 1 Basic Printer Functions