Graphic Image Settings Area; Preview Stamp; Fold - KIP 5000 User Manual

2.5.4.15 Graphic Image Settings Area

This displays the path to your selected graphic image. The path is relative to the
user's workstation.
NOTE:
1) The image file must also reside on the KIP IPS, it may be pushed to the IPS from
the workstation.
2) Or you may apply the stamp to document with a file label called "Savestamp.tif".
It will then automatically be copied from the workstation to the KIP IPS.

2.5.4.16 Preview Stamp

Click to see the configured Stamp settings in
the viewer. Use CRTL+TAB to cycle through
text and image.

2.5.5 Fold

Request allows the users to create Fold and Rotate schemes. These folding
features can be used with the KIPFold folding systems. The Request program
reads settings from the printer (presets.ini file in the LOGDIR folder) and
displays the folding choices in a dropdown menu.
Folding can be accomplished with two methods:
- Allow the printer to determine the rotation and pattern
- Override the printer settings to have rotation and patterns set in the Request.
The choice between the two methods depends on the installation environment. That is if a
small number of document sizes are to be folded with a standard set for width, length and
orientation it is simplest to have the printer control the folding (requires setup by qualified
technician) If the documents can vary with orientation, then folding must be configured in
request and printed / folded in this manner. You can also override method A with B at any
time for greater flexibility.
6-23 Section 6 Request