1) Select "U1." by pressing [
The setting value consists of 2 digits. The left value is not used. The right one is applied to the print
from the network.
2) Press [Enter] key to change the Image Enhancement Level for the print from controller. Then the
selected data is fixed.
Image Enhancement setting for the print from computer
Press this key to change of setting for the print
Setting Value Contents
0
Dot Enhancement Level 0 : None
1
Dot Enhancement Level 1 : Weak
2
Dot Enhancement Level 2 : Medium
3
Dot Enhancement Level 3 : Strong
4
Dot Enhancement Level 0 : None
5
Dot Enhancement Level 1 : Weak
6
Dot Enhancement Level 2 : Medium
7
Dot Enhancement Level 3 : Strong
] or [
] key.
job
TONER REMAIN
MENU
job
MENU
1-45
Applied to the prints
IMAGE DENSITY
ENTER
TEST
TONER REMAIN
ENTER
With
the Smoothing Function
Without
the Smoothing Function
Section 1
Basic Printer Functions
IMAGE DENSITY
TEST