KIP 5000 User Manual page 34

7) Loading Roll 1 or Roll 3
Front
7-1) Put the Roll Spool back into
the Roll Deck. (Gear side is
on the left and Lever side is
on the right.)
NOTE
When you place the Roll Spool back into the Roll Deck, make sure to fit the collar of the right
side of the Roll Spool into the proper position.
No Good
(The collar of the Roll Spool is out of
the proper position.)
Roll 2
Roll 1
Roll 3
Roll 4
Gear side
(The collar is set in the proper position.)
1-29
Rear
Good
Section 1 Basic Printer Functions