KIP 5000 User Manual page 18

Name of part
Toner Low Indicator
Roll Empty Indicator
Paper Mis-feed Indicator
Job Indicator
Ready Indicator
Display
Toner Remaining
Indicator
Image Density Indicator
Density Selection Key
Test Print Switch
Enter Key
* (Asterisk) Key
(Right Arrow) Key
(Left Arrow) Key
Menu Key
Functiom
Lights when toner is required.
Lights when the roll media in the selected Roll Deck is empty. It can
also light when the media is not correctly installed.
Lights when the printer or optional device fails to feed the media. A
mis-feed code is indicated on the Display if this occurs.
Lights when the printer receives a job
OFF : Power is off.
Lighting RED : Warming up / Printing is prohibited.
Flashing RED : The printer is in the Warm Sleep Mode.
(Quick Flash) (For Information on Warm Sleep Mode, refer to
pages 3-11 to 3-12.)
Flashing RED : The printer is in the Cold Sleep Mode.
(Normal Flash) (For Information on Cold Sleep Mode, refer to
pages 3-9 to 3-10.)
Lighting GREEN : Ready / Printing.
Flashing GREEN : Temperature Recovering Mode
(Printing is temporarily interrupted to recover the
temperature of Fuser Unit.)
It indicates the selected Roll Deck and the width of the roll media in
the selected Roll Deck. It also indicates an error code if the printer
has an error such as "paper mis-feed" or "door open".
Toner Remaining Quantity is indicated in 1/4 steps.
: Toner remains more than 3/4.
: Toner remains more than 2/4.
: Toner remains more than 1/4.
: Toner remains less than 1/4.
Image Density is indicated in 1/4 steps.
: : Darker
: Normal
: Lighter
: Lightest
You may change the density level by pressing the Density Selection
Key. (please also see the Touchscreen "?" "Configuration")
A test pattern will be printed out if you press the Test Print Switch.
(Service purposes only.)
Selected job is defined. (User Mode)
Function selection (User Mode)
Mode selection (Increment) (User Mode )
Mode selection (Decrement) (User Mode)
Menu selection (User Mode)
1-12 Section 1 Basic Printer Functions